Creating wide panels from narrow boards requires skill, the right clamps, and time for the glue to cure. Our panel glue-up service handles this time-consuming process for you, delivering flat, strong panels ready for your project.

Edge Gluing

We joint board edges perfectly straight and square, then clamp them under even pressure for gap-free joints. Proper edge preparation is critical - a well-prepared edge joint is stronger than the wood itself.

Panel Construction Options

  • Edge-glued panels: Boards joined edge-to-edge for width
  • Face-glued panels: Boards stacked for thickness
  • Butcher block: End-grain or edge-grain construction
  • Book-matched panels: Sequential boards opened like a book for symmetrical grain

Glue Selection

We use professional-grade adhesives appropriate for each application:

  • PVA (yellow glue): Interior furniture and cabinets
  • Polyurethane: Water-resistant for exterior or humid environments
  • Epoxy: For oily or difficult-to-glue species

Maximum Panel Size

Our clamp racks can accommodate panels up to 48" wide and 120" long. For wider assemblies, we can glue sections and join them with splines or biscuits.

Turnaround

Standard panel glue-ups require 24 hours of clamp time plus additional curing before machining. Rush service with faster-curing adhesives is available.

Equipment & Capabilities

  • Parallel clamps up to 48"
  • Pipe clamps for extra length
  • Caul boards for flat panels
  • Multiple glue options (PVA, PUR, epoxy)

Frequently Asked Questions

1 How do I calculate board feet for a panel?

Multiply thickness (inches) × width (inches) × length (feet), then divide by 12. Add 15-20% for waste and jointing.

2 Will my panel stay flat?

We use proper technique and clamping pressure. However, wood movement is natural - panels should be acclimated to their final environment and properly supported in use.

3 Can I supply my own lumber?

Yes, we can glue up customer-supplied material. Boards should be surfaced to consistent thickness before glue-up for best results.